Prestressed Concrete Bridge Design Seminar
Group 142@2x
Group 139

Learn more about precast, prestressed concrete bridge design in a three-session seminar jointly sponsored by the PCI Mid-Atlantic and PCI Northeast Chapters. Led by industry and fabricator experts Reid Castrodale, PhD, PE, FPCI; JP Binard, PE; Greg Gorman, PE; and Mike Culmo, PE, the virtual sessions give DOT professionals, contractors, consulting engineers, and other industry professionals the opportunity to dive deep into a range of precast transportation design and construction topics.

All three recordings of the April 2021 live sessions and their supplementary handouts are available. Get guidance and tips straight from the experts, discover current best practices, experience a virtual plant tour, and view a panel discussion with regional fabricators on a wide range of topics.

Download the Session Recordings and Handouts Now

Related Resources

Resource 01@2x
Group 143@2x
Recource 02@2x
Group 144@2x
Resource 03@2x
Group 145@2x

Speakers

Reid W. Castrodale, PhD, PE, FPCI

President

Castrodale Engineering Consultants, PC

Reid_Picture@2x

Reid W. Castrodale, PhD, PE, FPCI

President

Castrodale Engineering Consultants, PC

Reid Castrodale is President of Castrodale Engineering Consultants, PC, and a structural engineering consultant specializing in prestressed concrete, lightweight concrete, and accelerated bridge construction. A registered professional engineer in three states, he works as a Bridge Consultant for Georgia/Carolinas PCI, Managing Technical Editor of ASPIRE Magazine, and Director of Engineering for both the Expanded Shale, Clay, and Slate Institute (ESCSI) and STALITE.

Previously, Reid was a bridge engineer at Ralph Whitehead Associates (now STV) and the Portland Cement Association. He graduated from Georgia Tech and earned master’s and doctoral degrees from the University of Texas at Austin. Reid is a Fellow of PCI and has been active in PCI bridge committees for thirty years, serving as Chair of the Bridge Committee and Co-chair of the Bridge Design Manual Steering Committee during its development. Reid has developed and presented seminars on the PCI Bridge Design Manual and taught many courses on reinforced and prestressed concrete bridge design using the AASHTO LRFD Bridge Design Specifications.

JP Binard, PE

Owner & Manager

Precast Systems Engineering, LLC

JP_Picture@2x

JP Binard, PE

Owner & Manager

Precast Systems Engineering, LLC

JP Binard is Owner and Manager of Precast Systems Engineering (PSE), LLC, which specializes in precast, prestressed concrete construction engineering for buildings, marine structures, and bridges while utilizing UHPC in components and connections where possible. JP is registered in several states in the Mid-Atlantic and Northeast region and serves as Chair to the UHPC Bridge Subcommittee at PCI.

Previously, JP was Chief Engineer at Bayshore Concrete Products in Cape Charles, VA, and Chair of the Prestressed, Precast Concrete Pile Committee. He has authored and co-authored several papers on UHPC and precast, prestressed concrete topics. PSE oversaw the production of several full-scale UHPC girder specimens for testing at the Turner Fairbanks Highway Research Center and was recently awarded an SBIR for an innovative bridge deck solution. PSE is a partner of Precast Systems Inc. and UHPC Systems Inc. (a Cor-Tuf supplier).

Greg Gorman, PE

Senior Vice President & COO

PennStress, Roaring Spring, PA

Gorman_Picture@2x

Greg Gorman, PE

Senior Vice President & COO

PennStress, Roaring Spring, PA

Greg has 39 years of experience in the construction industry, with the 20 most recent years in the prestressed/precast concrete sector at PENNSTRESS and Newcrete Products.

In addition to precast, he has been fortunate to experience construction from multiple vantage points, including project management and business development with a general contractor; engineering and construction management with a consulting firm; and an owner representative as a US Naval Officer.

Mike Culmo, PE

Chief Bridge Engineer

CHA Consulting, Inc.

Culmo_Picture@2x

Mike Culmo, PE

Chief Bridge Engineer

CHA Consulting, Inc.

Michael P. Culmo is a Structural Engineer with 37 years of experience in bridge and highway design. He has extensive experience in the design of steel, concrete, and prestressed/precast concrete bridges, and has been responsible for managing design teams on new expressway bridges, highway interchanges, bridge rehabilitation, and related highway structures. He has special expertise is in the field of accelerated bridge construction technologies.

He has completed two research projects for the National Cooperative Research Program as the Principal Investigator. He is the author of numerous national publications and manuals on bridges and was the principal author of the 2018 AASHTO LRFD Guide Specifications for ABC.


Fabricator Roundtable Panel

Russell_Dickson_picture@2x

Russel Dickson, PE

VP of Engineering

PennStress, Roaring
Spring, PA

Troy_Jenkins_picture@2x

Troy Jenkins, PE

VP / Chief Engineer

Northeast Prestressed
Products, Cressona, PA

Mike_Weigand_picture@2x

Mike Weigand, PE

Chief Engineer

J. P. Carrara & Sons,
Middlebury, VT

About the PCI Mid-Atlantic AND PCI NORTHEAST Chapters

The PCI Mid-Atlantic and PCI Northeast are chapters of the Precast Prestressed Concrete Institute (PCI). By building awareness of precast benefits and use, supporting member success, and educating professionals in construction, design, and academia, these chapters aim to make precast, prestressed concrete building and transportation products an early choice for new projects.